This ISO standard proximity card is 0.75mm thick and can have printed material attached to the front. It is supplied with a pre-assigned unique code. Works best with our ECL-900 series proximity card readers.

Proximity Card Technology

Proximity cards (or access cards) are hybrid technology that incorporate a simple electric circuit (proximity tag and coil) imbedded in a plastic card. No battery is needed and the circuit is not removable without destroying it and the card. When the card is correctly positioned with respect to a reader a high speed RF signal passes between card and reader and unique data is transferred.

Specification:

  • Range: 10cm-25cm (3.94"-9.84")
  • Can bear printed material
  • ISO standard spec
  • 0.75mm thick
  • Each card has a unique pre-assigned code (8 digit number) printed on the back.
  • 50 pieces per pack

 

This proximity tag comes attached to a keychain and is supplied with a pre-assigned unique code. Sealed, nearly impossible to break by accident, it works just like any other proximity card and being attached to keys, is difficult to misplace.

Proximity Card Technology

Proximity cards (or access cards/fobs) are hybrid technology that incorporate a simple electric circuit (proximity tag and coil) imbedded in a plastic card. No battery is needed and the circuit is not removable without destroying it and the card. When the card is correctly positioned with respect to a reader a high speed RF signal passes between card and reader and unique data is transferred.

Specification:

  • Range: 5cm-10cm (1.97"-3.94")
  • Waterproof
  • Shock proof
  • Hard to lose
  • Each tag has a unique pre-assigned code (8 digit number) printed on the back
  • Dimensions: 39mm x 35mm x 7mm (1.54" x 1.38" x 0.28").